Error Code 0x80070035: The Network Path Was Not Found

The error code 0x80070035 indicates that the network path was not found. This behavior occurs if the NetBIOS over TCP/IP is not enabled in Windows Vista. To fix this error, follow these steps:

1. Open the Network and Sharing Center by clicking on the Start button and typing "Network and Sharing Center".
2. Click on the "Change adapter settings" link in the left-hand pane.
3. Right-click on the connection that you use for the local connection, and then click "Properties".
4. Click on the "Internet Protocol Version 4 (TCP/IPv4)" tab.
5. Click on the "Advanced" button.
6. On the "WINS" tab, click on the "Enable NetBIOS over TCP/IP" checkbox.
7. Click on the "OK" button to save the settings.

If the issue is not resolved, you may try to access the computer with \\[IP address] as a workaround.

Here are some additional things to keep in mind:

You must be logged in to the computer as an administrator in order to enable NetBIOS over TCP/IP.

• If you are using a firewall, you may need to configure it to allow NetBIOS traffic.
• If you are still having problems, you can try restarting your computer.
• I hope this helps!

Here are some other things you can do to troubleshoot the error code 0x80070035:

• Make sure that the computer names are spelled correctly.
• Check the network cables to make sure that they are properly connected.
• Restart the network services.
• Reinstall the network adapter drivers.